Line striping machines paint lines on surfaces, such as parking spaces and roads. The devices apply a line of paint that\u2019s visible from far away. You can also use line striping machines to mark off areas where construction work is happening or other hazardous areas. Use the following technique when painting gradual turns with a line striping machine. <\/p>\n\n\n\n\n\n\n\n
A dirty tip can cause all kinds of problems, including wonky lines. Be sure to clean your machine\u2019s tip after each use so you don\u2019t waste time at a jobsite. You can use a wire brush to assist with removing clogs.<\/p>\n\n\n\n
Make sure you set up your line striping machine correctly before you start working on any project. This will save you time and effort in the long run.<\/p>\n\n\n\n
To stripe gradual turns, you need to apply slight pressure to the handles in the direction you want. Much like a bicycle, your handles guide the wheel around curves.<\/p>\n\n\n\n
One of the most important things to remember when painting a gradual turn with a line striping machine is to make sure you keep enough paint in the reservoir. It\u2019s better to have too much paint than too little. Even as you are ending a striping project, ensure you have enough paint that you won\u2019t have to pause to refill in the middle of a turn.<\/p>\n\n\n\n